| 1. | The common fault analysis and settlements in belt conveyor system
带式输送机常见故障分析和处理 |
| 2. | This paper establishes dynamic model of the longitudinal vibration of the overall belt conveyor system with finite elemental method and simulation module of driving system in neural networks
摘要通过有限单元法建立了整个输送机系统纵向振动的动力学模型，用仿真软件的神经网络工具箱编程建立了驱动系统仿真模块。 |
| 3. | This paper puts forward a dynamic analysis method on belt conveyor through carefully study on belt conveyor system . the unified expression of conveyor belts " moving behavior has been obtained . the models contain the dynamic continuous one and the discrete one
本文通过对输送带的粘弹性特性进行了深入的研究，推导出了输送带运动特性方程的通用表达式，分别建立了带式输送机系统的动态连续模型和闭合回路的离散模型。 |
| 4. | This paper , from the angle of elastodynamics , studied the dynamic performance of the belt conveyor system by the action of transient load at acceleration and deceleration and prohided the proper acceleration and deceleration curves of the beh conveyor , which can be used in the engineering design
从弹性动力学角度出发，研究了带式输送机在不同的加、减速度冲击作用下和系统的动态特性，并提出合理的带式输送机的加、减速度曲线，可供工程设计采用。 |
| 5. | The rollers and housings , the important transmission parts in belt conveyor systems performing power transmission , are often under complex conditions and easily damaged when design parameters are not correct . and the capability and reliability of belt conveyor is mainly determined by the key parts ’ strength and stiffness
滚筒和机架是带式输送机的重要部件,承受复杂载荷,一旦设计参数选取不当,很容易在使用中失效,对输送机整体性能和可靠性影响很大。 |
| 6. | This paper analyses mainly viscoelastic properties of conveyor belt about the belt conveyor , constructs finite element discrete models and dynamic equations for parts and system of the belt conveyor , studies thoroughly automatic modeling theory from the static state to the dynamic state of the belt conveyor system including form function of the running routex element division parameter calculation ^ state equation formation automatically and solution of system and so on
本文通过对带式输送机输送带的粘弹性特性的分析，建立了带式输送机各组成部分及其系统的有限元离散模型和动力学方程，详细地研究了带式输送机系统从静态到动态设计的自动建模理论，其中包括运行线路的形态函数、质点划分、参数计算、系统状态方程生成及其方程的求解等。 |
| 7. | Software about automatic modeling from the static state to the dynamic state of the belt conveyor system is compiled by using visual basic language , comes the automatic modeling theory from the static state to the dynamic state of the belt conveyor system into reality . it is illustrated with two - dimension or three - dimension graphics to make the calculation results of dynamic parameters explicit and convenient to analyze
用visualbasic6 . 0语言编写了带式输送机从静态到动态设计的自动建模应用程序，基本实现了自动建模理论，即实现了运行线路的自动识别、自动生成及求解系统状态方程等，并配以二维、三维图形显示动态参数的值，使结果直观，便于分析。 |
